Set Message Waiting On Other Telephones - Toshiba Strata CT User Manual

Features
To answer a Message Waiting light
1. Lift the handset.
2. Press
3. If your telephone calls a busy
station or there is no answer,
hang up and try later.
...or you can bypass this
message and listen to the next
message by going on-hook
and repeating Steps 1 and 2.
4. After receiving the message,
hang up.
To cancel the Message Waiting light
1. Lift the handset.
2. Press
If it was voice mail that lit your message waiting LED, it will automatically turn off your
Note
LED as soon as you retrieve your messages.

Set Message Waiting On Other Telephones

After reaching a busy or unanswered telephone equipped with a Message Waiting indicator, you can
set a Message Waiting indication on the called telephone. A flashing lamp or LED at the called
telephone indicates a call is waiting. The station user can press the button associated with the flashing
#408
LED or enter
To set a message waiting indication on another telephone
1. If a called telephone station is
busy or does not answer,
press
2. Hang up.
Strata CT Standard Telephone User Guide November 2001
#408
.
#409
to call you back.
7 7 7 7
.
You hear dial tone.
Your phone rings the device that set the indication. If there
is no answer, hang up and try later. (The LED continues to
flash.)
The LED continues to flash.
If the Message Waiting LED continues to flash, you have
more messages—repeat Steps 1~3 to retrieve them.
You hear dial tone.
The Message Waiting indication is cancelled.
A Message Waiting light is set at the station. If you are
calling a standard telephone, the telephone must have with
a message waiting light. All Toshiba digital or electronic
telephones have Message Waiting lights.
Message Waiting
25