Related Manuals for Sealey SM2502
Summary of Contents for Sealey SM2502
- Page 1 INSTRUCTIONS FOR Mini Drilling/Milling Machine SM2502 MODEL NO: Original Language Version © Jack Sealey Limited SM2502 Issue: 3(L) - 26/07/17...
- Page 2 Device (RCD) is used. It is particularly important to use an RCD with portable products that are plugged into a supply which is not protected by an RCCB. If in any doubt consult a qualified electrician. You may obtain a Residual Current Device by contacting your Sealey dealer.
-
Page 3: Introduction & Specification
Locking pin 4 Hex keys (3,4,5,6mm) Socket head wrench 3 double ended spanners 8-10,14-17,17-19 Chuck key. 2 Handles 10. ‘T’ nuts 11. Fuse 12. Draw bar fig. 1 Original Language Version © Jack Sealey Limited SM2502 Issue: 3(L) - 26/07/17... -
Page 4: Setup And Operation
4.1. Setting up for Milling. (Disconnect the machine from the power supply while setting up.) The machine is supplied without milling attachments. (See section 8 for details.) Contact your local Sealey dealer for a full range of accessories. 4.2. Engaging vertical fine feed. Prior to milling, activate the fine feed wheel ( see fig.3-5 ) by pushing the drill feed hub inwards toward the body of the machine so that the two sets of castellations on the hub shaft engage together and lock the movement of the drill feed. - Page 5 Before the machine will start again the rotary speed switch must be returned to the ‘I’ position and the emergency switch cover must be released by pushing the large red button upwards. Original Language Version © Jack Sealey Limited SM2502 Issue: 3(L) - 26/07/17...
-
Page 6: Maintenance
6.6.2. Adjust the head movement using the four adjusters marked ‘H’ in fig.9 6.6.3. Check that the column is vertical and that the column pivot nut is tight. fig.10 fig. 7 fig.9 Original Language Version © Jack Sealey Limited SM2502 Issue: 3(L) - 26/07/17... -
Page 7: Troubleshooting
Important: No Liability is accepted for incorrect use of this product. Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim. Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR 01284 757500 01284 703534 sales@sealey.co.uk...