GE 1200 Series Interconnection And Wiring Manual page 21

FP1200 panel power supply fault relay connection
Figure 17: FP1200 panel power supply fault relay connection on PS1200 board
1. Normally open (NO)
2. Common (C)
3. Normally closed (NC)
Fault output (NC) (Jumpers default position = A)
J10 (pins for position A connected on PCB)
•
Position A = 660Ω
•
Position B = 0Ω
J11 (Pins for position B connected on PCB)
•
Position A = 3.3kΩ
•
Position B = 0Ω
1200-2000 Series Fire Panels, Repeaters, and Emulators
Interconnection and Wiring Guide
21