Siemens SINUMERIK 840D sl Programming Manual page 623

GETACTT
Get active tool from a group of tools with
the same name
GETSELT Get selected T number
GETT50 Get T number for tool name
GOTO Jump statement first forward then
backward (direction initially to end of
program and then to start of program)
GOTOF Jump forwards (toward the end of the
program)
GOTOB Jump backwards (toward the start of the
program)
GOTOC Alarm 14080 Suppress jump destination
not found.
GWPSOF Deselect constant grinding wheel
peripheral speed (GWPS)
GWPSON Select constant grinding wheel peripheral
speed (GWPS)
Job planning
Programming Manual, 03/2006 Edition, 6FC5398-2BP10-1BA0
Parts program GOTO (label, block no.)
and can also be Labels must be present in
applied in the sub-program
technology
GOTOF (Label, block no.)
cycles.
GOTOB (Label, block no.)
See GOTO
GWPSOF(T No.)
GWPSON(T No.)
Tables
15.1 List of statements
s
s
15-19