Configuration Using "Wago Ethernet Settings; Figure 35: "Wago Ethernet Settings" - Start Screen - WAGO PFC100 Manual

214 Commissioning
</dg_

Configuration using "WAGO Ethernet Settings"

7.8.3
The "WAGO Ethernet Settings" program enables you to read system information
about your controller, make network settings and enable/disable the Web server.
Observe the software version!
To configure the controller, use at least Version 6.4.1.1 dated 2015-06-29 or
newer of "WAGO Ethernet Settings"!
You must select the correct COM port after starting "WAGO Ethernet Settings".
Figure 35: "WAGO Ethernet Settings" – Start Screen
For this, click "Settings" and then "Communication".
In the "Communication settings" window that then opens, adapt the settings to
your needs.
Manual
Version 1.6.0, valid from FW Version 03.02.02(14)
WAGO-I/O-SYSTEM 750
750-8100 PFC100; 2ETH; ECO