Advertisement
Advertisement
Related Manuals for Vax Platinum PowerMax ECB1SPV1
Summary of Contents for Vax Platinum PowerMax ECB1SPV1
- Page 1 PROVEN TO CLEAN BETTER THAN THE LEADING RENTAL LET’S GET STARTED. ECB1SPV1...
-
Page 2: Let's Talk Safety
Let’s talk safety This carpet washer is intended for household use only and NOT for commercial or industrial use. • Only use the carpet washer indoors and keep the area you’re cleaning well lit. Basic • Keep fingers, hair and loose clothing away from moving parts safety and openings whilst using the carpet washer. - Page 3 Cleaning and user maintenance shall not be made by children without supervision. • Only Vax recommended tools and solution should be used with this carpet washer. Using other solutions may invalidate the guarantee. • Don’t use the carpet washer to pick up hot coals, cigarette butts, matches or smoking hot burning items or use in an area where there may be harmful fluids (chlorine, bleach and ammonia drain cleaner).
- Page 4 Maintaining your carpets will ensure they keep their appearance for longer and smell fresh and clean. You’ve chosen carpets for your home for a reason and Vax will help you take good care of them.
-
Page 5: Table Of Contents
Contents Included with your machine Let’s talk safety Hose Getting to know your machine Getting started Upholstery wash tool Using your machine SpinScrub tool Taking care of your machine Let’s talk technical Pre-treatment wand What to do if it goes wrong Getting in touch Hard floor squeegee Accessories... -
Page 6: Getting To Know Your Machine
Quick Clean function pedal Recline pedal Nozzle SpinScrub brushes and brushbars Technical Specification Accessories & Consumables Name Vax Platinum PowerMax SpinScrub Tool 1-9-133245-00 Code ECB1SPV1 Upholstery Wash Tool Cord length 9m 1-9-136232-00 Weight 9.5kg Wattage: See rating label on machine for details. -
Page 7: Getting Started
• Only use Vax carpet solution. Using other solutions may cause excess foaming and will invalidate your guarantee. • The clean water tank should only be filled with warm water (max 40�C). Filling the clean water tank with hot/ boiling water will damage your machine and invalidate the guarantee. -
Page 8: Using Your Machine
Using your machine NOTE: Carpets should be dry vacuumed thoroughly before washing. For heavily soiled areas, it may be necessary to repeat the cleaning process. Make criss-crossing strokes across the original pattern and overlap with each pass. Filling the water/solution tank and cleaning modes Pour the required amount Fill the clean water tank Twist the water/solution... - Page 9 Using your machine IMPORTANT: Your dirty water tank is fitted with a float. When the dirty water tank is full, or the floorhead is not in contact with the carpet, the float will shut off the suction on the carpet washer. You will be able to hear if this has happened as the motor noise on the machine will increase.
- Page 10 Using your machine Using the hose and tools NOTE: The carpet washer should be in the upright position when using the hose and tools; this will de-activate the SpinScrub brushes and brushbar. Fill the clean water tank Turn the wash/rinse dial Pull down the accessory Pour the required amount to ‘wash’.
- Page 11 Using your machine Using the pre-treatment wand Pre-treating your carpet before washing will help to remove stubborn stains. Do not saturate your carpet. Fill the clean water tank Turn the wash/rinse dial Pull down the accessory Pour the required amount to ‘wash’.
- Page 12 Using your machine CAUTION: To prevent damage to wood floors and other hard floors, follow the flooring manufacturer's cleaning recommendations. Inspect the floor surface for a worn finish, bare wood or separated joints. It is not recommended to use the carpet washer on floors if any of these conditions exist. Test on an inconspicuous area first Washing hard floors IMPORTANT: Hard floors should be dry vacuumed thoroughly before washing.
- Page 13 Using your machine CAUTION: Always unplug the carpet washer before performing any maintenance/troubleshooting checks. Emptying and cleaning the dirty water tank IMPORTANT: Empty and rinse out clean and dirty water tanks and leave to air dry before replacing. Do not leave solution stored in the tanks between uses. Press the dirty water Pull and lift the dirty water Empty the dirty water over the sink.
-
Page 14: Taking Care Of Your Machine
Taking care of your machine CAUTION: Always unplug the carpet washer before performing any maintenance/troubleshooting checks. Removing and cleaning the nozzle Remove both tanks and tilt Lift the nozzle release clip Rinse the nozzle under To replace the nozzle, line the carpet washer back. - Page 15 Taking care of your machine Removing and cleaning the SpinScrub brushes Lie the carpet washer on its Firmly pull the sides Using a pair of scissors, Line up spindle and tabs on back exposing the SpinScrub of the SpinScrub remove any threads or side of spin scrub cover into brushes and brushbar.
- Page 16 Taking care of your machine Removing and cleaning the brushbar Using a crosshead screwdriver remove the 4 screws Pull and slide the left side Using a crosshead on the side brushes and the top and bottom screws brushes and remove the screwdriver, undo the 2 from each of the rug guards (metal pins) to get access side cap from the brushbar.
- Page 17 Accessories Don’t forget your solution! Order at: www.vax.co.uk/spares-and-solutions Platinum (1.5l) 1-9-139136 Platinum Carpet Cleaning Solution deep cleans carpets and removes stubborn stains. Safe to use on wool carpets - Woolsafe approved. Ultra+ (1.5l) 1-9-137771 Ultra+ Carpet Cleaning Solution tackles stubborn spots and stains and removes unpleasant odours too.
-
Page 18: What To Do If It Goes Wrong
What to do if it goes wrong IMPORTANT: Always unplug the carpet washer before performing any maintenance/troubleshooting checks. Problem Solution • Check the contents on the box to make sure the part is definitely included with your washer. There is an accessory missing •... -
Page 19: Getting In Touch
Getting in touch Registration required. Terms and conditions apply, see vax.co.uk for details. †... - Page 20 Local Authority or retailer for recycling advice. © 2017 Vax Limited. All rights reserved. The VAX trade mark and Vax lozenge is the property of Techtronic Floor Care Technology Ltd and is registered in the EU and may be pending or registered in other countries.
Need help?
Do you have a question about the Platinum PowerMax ECB1SPV1 and is the answer not in the manual?
Questions and answers
Circular brushes don’t spin front roller ok. The belt looks slack
How do I access the hose to check for blockage? It is currently not collecting the dirty water. I have cleaned all the brushes and rollers
To access the hose on a Vax Platinum PowerMax ECB1SPV1 and check for blockages:
1. Ensure the machine is switched off and unplugged.
2. Locate the hose connector port cover and make sure it is closed properly.
3. Open the hose connector port cover and detach the hose.
4. Visually inspect the hose for blockages and remove any debris.
5. Reattach the hose securely and close the connector port cover.
6. Test the machine to ensure proper suction and water flow.
If the issue persists, check the filter screen in the dirty water tank for dirt or debris and clean it.
This answer is automatically generated
How wide is vac power max compared with vax smartwash?