Advertisement
Advertisement
Related Manuals for Vax RapidPower PRO ECGLV1B1
Summary of Contents for Vax RapidPower PRO ECGLV1B1
- Page 1 RapidPower CARPETS DRY IN ABOUT 1 HOUR LET’S GET STARTED. ECGLV1B1...
-
Page 2: Let's Talk Safety
Let’s talk safety This carpet washer is intended for household use only and NOT for commercial or industrial use. • Only use the carpet washer indoors and keep the area you’re cleaning well lit. Basic • Keep fingers, hair and loose clothing away from moving parts and safety openings whilst using the carpet washer. - Page 3 • Before using the carpet washer test your carpets/rugs/upholstery for colourfastness and pile distortion. • Only Vax recommended tools and solution should be used with this carpet washer. Using other solutions may invalidate the guarantee. matches or smoking hot burning items or use in an area where there may be harmful fluids (chlorine, bleach, and ammonia drain cleaner).
- Page 4 Maintaining your carpets will ensure they keep their appearance for longer and smell fresh and clean. You’ve chosen carpets for your home for a reason and Vax will help you take good care of them.
-
Page 5: Table Of Contents
Contents Included with your machine Let’s talk safety Rapid Power Pro Getting to know your machine Hose Getting started Using your machine Wash Tool Taking care of your machine 250ml Ultra+ Solution Let’s talk technical What to do if it goes wrong Accessory Bag Getting in touch Accessories... -
Page 6: Getting To Know Your Machine
On/Off pedal Nozzle SpinScrub brushes Technical Specification Name Rapid Power Pro Code ECGLV1B1 Part number 1-1-138933 Voltage 220-240~50/60Hz Wattage 1200W Cord length 8m Weight 8.4kg Subject to technical change without notice. To purchase consumables and accessories, please visit vax.co.uk... -
Page 7: Getting Started
When using the carpet washer, basic safety precautions should always be observed and don’t over saturate your carpets. Only use Vax carpet solution. Using other solutions may cause excess foaming and will invalidate your guarantee. The clean water tank should only be filled with warm water (max 40°C). Filling the clean water tank with hot/boiling water will damage your machine and invalidate the guarantee. -
Page 8: Using Your Machine
Quick Clean Mode: Best for a quick, surface clean because carpets dry in about 1 hour. Deep Clean Mode: Best overall results for a thorough, deep clean. Press the clean water/ Twist the solution tank Pour Vax carpet cleaning Twist the water tank cap solution tank release cap anti-clockwise to solution into the tank. - Page 9 Using your machine Squeeze the trigger to For best results apply Plug into the mains, Press the recline pedal release solution and water/solution on the press the on/off pedal and pull the handle water mix. forward stroke and to switch on. backwards.
- Page 10 SpinScrub brushes and brushbar. Do not place the washer at top of stairs to avoid it falling down stairs. Place washer at bottom of stairs and work up. Using the hose and wash tool Turn wash/rinse dial Pour Vax carpet cleaning Fill the clean water Open the hose connector solution into the solution tank with warm water to wash.
- Page 11 Using your machine Press the trigger on the Squeeze the trigger To remove the tool, lift and hose to release solution on the forward stroke, push the tool clip over the /water. release the trigger on the tab at the end of the hose backward stroke to pick and pull to remove.
-
Page 12: Taking Care Of Your Machine
Taking care of your machine CAUTION: Always unplug the carpet washer before performing any maintenance/troubleshooting checks. Emptying and cleaning the dirty water tank IMPORTANT: Always empty and rinse out clean and dirty water tanks and leave to air dry before replacing. Do not leave solution stored in the tanks between uses. - Page 13 Taking care of your machine To re-fit, slide the dirty Hook the tank release Lift and hook the latch water tank onto the carpet catch over the front of the on the tank onto the lid washer, making sure tank and push downwards and push down to lock the tabs on the tank line to lock the catch in place.
-
Page 14: Let's Talk Technical
Let’s talk technical CAUTION: Always unplug the carpet washer before performing any maintenance/troubleshooting checks. Cleaning the SpinScrub brushes Remove the tanks and lie Firmly pull the sides of Depress the clips to The SpinScrub brushes the washer on its back the SpinScrub brushes release the SpinScrub can be removed and... - Page 15 Let’s talk technical Cleaning the SpinScrub filter Remove both tanks and Lift the nozzle release clip Hold the front of the Wipe any dirt and debris tilt the carpet washer to unlock the nozzle. nozzle and push down to from the mesh filter. so its lying on its back.
-
Page 16: What To Do If It Goes Wrong
What to do if it goes wrong What to do if it goes wrong CAUTION: To reduce the risk of personal injury, unplug the carpet washer before performing maintenance/ troubleshooting checks. Problem Solution • Check the contents panel on the box to make sure the part is definitely included with this carpet washer. - Page 17 Getting in touch † Registration required. Terms and conditions apply.
- Page 18 Accessories Don’t forget your accessories! Order at: www.vax.co.uk/spares-and-solutions Ultra+ carpet cleaning solution (1.5l) 1-9-132706-00 Ultra+ Carpet Cleaning Solution tackles stubborn spots and stains and removes unpleasant odours too. It’s specially formulated to leave no sticky residue, so your carpets stay fresher for longer.
- Page 19 Notes...
- Page 20 Local Authority or retailer for recycling advice. © 2017 Vax Limited. All rights reserved. The VAX trade mark and Vax lozenge is the property of Techtronic Floor Care Technology Ltd and is registered in the EU and may be pending or registered in other countries.
Need help?
Do you have a question about the RapidPower PRO ECGLV1B1 and is the answer not in the manual?
Questions and answers
brushes will not spin round after cleaning
The brushes on the Vax RapidPower PRO ECGLV1B1 may not spin after cleaning due to the following reasons:
- The carpet washer is not reclined (the brushes only spin when reclined).
- There are blockages in the SpinScrub brushes or brushbar.
- The brushbar or spindle on the back of the SpinScrub brush is damaged.
- The SpinScrub filter is blocked and needs to be wiped clean.
Check these components and clear any blockages or debris to resolve the issue.
This answer is automatically generated