Using The Debug Board - Hitachi SH7760 Solution Engine2 Overview

2.4.2 Debug Board Connection
Figure 2.4 shows a debug board connection method. Connect the debug board to the extension slot (CN4) on
the Solution Engine2 board.
[Notes]
When connecting the debug board or detaching the EPROM, turn off Solution Engine2 in advance. When attaching
the EPROM again, check the connecting direction.
EPROM
TP3
TP2
TP1
J1
Solution Engine2
Extension slot (CN2)
Connection
Extension slot (CN1)
Figure 2.4 Debug Board Connection
CN1
CN2
Figure 2.5 EPROM Connection
TP3
TP2
TP1
J1
20
EPROM
CN1
CN2