3.4
File and Program Management
3.4.1
Program memory
3.4.1.1
Program memory in the NCK
Files and programs (e.g. main programs and subprograms, macro definitions) are saved in the
non-volatile program memory (→ passive file system).
A number of file types are also stored here temporarily; these can be transferred to the work
memory as required (e.g. for initialization purposes when machining a specific workpiece).
Standard directories
The following standard directories are available:
Directory
_N_DEF_DIR
_N_CST_DIR
NC programming
Programming Manual, 12/2019, 6FC5398-2EP40-0BA0
3.4 File and Program Management
Content
Data modules and macro modules
Standard cycles
Work preparation
551