Yamaha O2R96 Service Manual page 190

02R96
12.3.12 Parameter change (Backup memory)
Reception
This is received if [Parameter change RX] is ON and the [Rx CH] matches
the device number included in the SUB STATUS.
This is echoed if [Parameter change ECHO] is ON.
When this is received, the value of the specified parameter will be con-
trolled.
STATUS 11110000 F0
ID No. 01000011 43
SUB STATUS 0001nnnn 1n
GROUP ID 00111110 3E
MODEL ID 00001011 0B
ADDRESS 00000100 04
0aaaaaaa ee
0aaaaaaa pp
0ccccccc cc
DATA 0ddddddd dd
:
EOX 11110111 F7
12.3.13 Parameter request (Backup memory)
Reception
This is received if [Parameter change RX] is ON and the [Rx CH] matches
the device number included in the SUB STATUS.
This is echoed if [Parameter change ECHO] is ON.
When this is received, the value of the specified parameter will be transmit-
ted as a Parameter Change.
STATUS 11110000 F0
ID No. 01000011 43
SUB STATUS 0011nnnn 3n
GROUP ID 00111110 3E
MODEL ID 00001011 0B
ADDRESS 00000100 04
0aaaaaaa ee
0aaaaaaa pp
0ccccccc cc
EOX 11110111 F7
12.3.14 Parameter change (Function call Library:
store/recall)
Reception
This is received if [Parameter change RX] is ON and the [Rx CH] matches
the device number included in the SUB STATUS.
This is echoed if [Parameter change ECHO] is ON.
When this is received, the specified memory/library will be stored/recalled.
Transmission
If [Parameter change ECHO] is ON, this message will be retransmitted
without change.
STATUS 11110000 F0
ID No. 01000011 43
SUB STATUS 0001nnnn 1n
GROUP ID 00111110 3E
MODEL ID 00000110 7F
ADDRESS 00010000 10
00ffffff ff
0aaaaaaa aa
0aaaaaaa aa
DATA 0ddddddd dd
0ddddddd dd
EOX 11110111 F7
function
SCENE RECALL
EQ LIB RECALL
GATE LIB RECALL
COMP LIB RECALL
EFF LIB RECALL
CHANNEL LIB RECALL
INPATCH LIB RECALL
OUTPATCH LIB RECALL
Bus to Stereo LIB RECALL
190
System exclusive message
Manufacture's ID number (YAMAHA)
n=0-15 (Device number=MIDI Channel)
MODEL ID (digital mixer)
02R96
Backup memory
Element No.
Parameter No.
Channel No.
Data
:
End of exclusive
System exclusive message
Manufacture's ID number (YAMAHA)
n=0-15 (Device number=MIDI Channel)
MODEL ID (digital mixer)
02R96
Backup memory
Element No.
Parameter No.
Channel No.
End of exclusive
System exclusive message
Manufacture's ID number (YAMAHA)
n=0-15 (Device number=MIDI Channel)
MODEL ID (digital mixer)
Universal
Address UU
Address UL (function)
Address LU (number H)
Address LL (number L)
channel High
channel Low
End of exclusive
number channel*1) tx/rx
0x00 0-99 256 tx*2)/r
x
0x01 1-200 0-513 tx/rx
0x02 1-128 0-95 tx/rx
0x03 1-128 0-513 tx/rx
0x04 1-128 0-7 tx/rx
0x06 0-128 0-513 tx/rx
0x07 0-32 256 tx/rx
0x08 0-32 256 tx/rx
0x09 0-32 256 tx/rx
function number
Surround Monitor LIB RECALL 0x0A 0-32
AUTOMIX LIB RECALL 0x0B 1-16
SCENE STORE 0x20 1-99
EQ LIB STORE 0x21 41-200
GATE LIB STORE 0x22 5-128
COMP LIB STORE 0x23 37-128
EFF LIB STORE 0x24 53-128
CHANNEL LIB STORE 0x26 3-128
INPATCH LIB STORE 0x27 1-32
OUTPATCH LIB STORE 0x28 1-32
Bus to Stereo LIB STORE 0x29 1-32
Surround Monitor LIB STORE 0x2A 1-32
AUTOMIX LIB STORE 0x2B 1-32
*1) 0:CH1 - 55:CH56, 128:BUS1 - 135:BUS8, 256:AUX1 -
263:AUX5, 512:STEREO L - 513:STEREO R
Use 256 if the recall destination or store source is a single data
item.
Effect is 0:Effect 1–3:Effect 4
If the store destination is 16383 (0x3FFF), this indicates that
the library data has been changed by a external cause
(only transmitted by the 02R96)
*2) This is also transmitted when a program that has not been
assigned to the [Program change table] is recalled.
(Normally this would be transmitted as a program change
message.)
12.3.15 Parameter change (Function call: title)
Reception
This is received if [Parameter change RX] is ON and the [Rx CH] matches
the device number included in the SUB STATUS.
This is echoed if [Parameter change ECHO] is ON.
When this is received, the title of the specified memory/library will be
changed
Transmission
In response to a request, a Parameter Change message will be transmitted
on the [Rx CH].
If [Parameter change ECHO] is ON, this message will be retransmitted
without change.
System exclusive message
STATUS 11110000 F0
Manufacture's ID number (YAMAHA)
ID No. 01000011 43
n=0-15 (Device number=MIDI Channel)
SUB STATUS 0001nnnn 1n
MODEL ID (digital mixer)
GROUP ID 00111110 3E
Universal
MODEL ID 00000110 7F
Function call Library
ADDRESS 00010000 10
Address UL (function)
0100aaaa 4a
Address LU (number H)
0nnnnnnn nn
Address LL (number L)
0nnnnnnn nn
title 1
DATA 0ddddddd dd
: :
title x(depend on the librar y)
0ddddddd dd
End of exclusive
EOX 11110111 F7
function number
SCENE LIB TITLE 0x40 0-99, 256(0:response
only)
EQ LIB TITLE 0x41 1-200(1-40:response only) 16
GATE LIB TITLE 0x42 1-128(1-4:response only)
COMP LIB TITLE 0x43 1-128(1-36:response only) 16
EFF LIB TITLE 0x44 1-128(1-52:response only) 16
CHANNEL LIB TITLE 0x46 0-128(0-1:response only)
INPATCH LIB TITLE 0x47 0-32(0:response only)
OUTPATCH LIB TITLE 0x48 0-32(0:response only)
Bus to Stereo LIB TITLE 0x49 0-32(0:response only)
Surround Monitor LIB TITLE 0x4A 0-32(0:response only)
AUTOMIX LIB TITLE 0x4B 1-16
12.3.16 Parameter request (Function call: title)
Reception
This is received if [Parameter change RX] is ON and the [Rx CH] matches
the device number included in the SUB STATUS.
This is echoed if [Parameter change ECHO] is ON.
When this is received, a Parameter Change message will be transmitted on
the [Rx CH].
channel*1) tx/rx
256 tx/rx
256 tx/rx
256, 16383 tx/rx
0-513, 16383 tx/rx
0-56, 16383 tx/rx
0-513, 16383 tx/rx
0-7, 16383 tx/rx
0-513, 16383 tx/rx
256, 16383 tx/rx
256, 16383 tx/rx
256, 16383 tx/rx
256, 16383 tx/rx
256, 16383 tx/rx
size
16
16
16
16
16
16
16
16