Removal - NEC Express5800 Series User Manual

Chapter 2 Preparations

Removal

1.14.2
Remove a Hard Disk Drive in the following procedure.
1. Refer to Chapter 2 (1.3 Overview of Installation and Removal) for preparations.
2. Push the lever to unlock and open the
handle.
3. Hold the tray firmly and pull out the Hard
Disk Drive.
4. If you intend to use the server while the
Hard Disk Drive is removed, fill the open
bay with a dummy tray.
5. Turn on the server, start the SETUP utility, and then specify the boot order from the Boot menu. For
details about the Boot menu, refer to Chapter 2 (1.2.5 Boot) in "Maintenance Guide".
6. Refer to Chapter 2 (1.16 Attaching the Front Bezel) to put the front bezel back.
Important
If you dispose of the removed hard disk drive, follow instructrions
described in Chapter 1 (1. Transfer, Movement, and Disposal) in
"Maintenance Guide".
Note
If you have to remove a failed hard disk drive, check the bay with its DISK LED lit in
amber.
Note
Do not pull the handle to remove the hard disk drive.
Doing so may damage the handle.
Express5800/R110e-1E User's Guide
1. Installing Internal Optional Devices
DISK LED
97