NEC Express5800 Series User Manual page 74

Chapter 2 Preparations
8. Unscrew the battery bracket securing the
battery.
9. Write down the installation date (year
and month) on the SET UP DATE
LABEL and attach it to the position
shown in the image on the right.
10. Using the image on the right as a
reference, connect the battery cable to
the battery pack.
When connecting the cable, check the
orientation of the connector and connect
straight. Refer to the image on the right
to determine the correct direction of the
connector.
11. Attach the extra battery to the battery
bracket by using 3 screws.
The installation position of the extra
battery varies between PCI#1 and
PCI#2.
12. Attach the bracket you removed in step 8
using the screw.
74
Attach the battery for RAID
Controller installed in PCI#2
Express5800/R110e-1E User's Guide
1. Installing Internal Optional Devices
Write the date.
Example: Y 2007. M 12
With battery bracket facing up
Blue line
comes on
the left
Attach the battery for RAID
controller installed in PCI#1