NEC Express5800 Series User Manual page 121

Chapter 3 Setup
 <F2> key
If you press this key, the following window appears. If you select Yes, the previous parameter(s) are
restored.
 <F3> key
If you press this key, the following window appears. If you select Yes, restore the parameters of the
currently selected item to the default setting. (This might be different from the parameters configured
before shipment.)
 <F4> key
If you press this key, the following window appears. If you select Yes, the parameter you configured is
saved and SETUP closes.
Load Previous Values?
[Yes] No
Load Setup Defaults?
[Yes] No
Save configuration and exit?
[Yes] No
Express5800/R110e-1E User's Guide
2. System BIOS Setup
121