Booster Installation - Nuna Exec User Manual

Booster Installation

recommended 4 years or older (40–120 lb)
Booster
40
(18.1 kg)
Booster Setup
1
- Harness MUST be stored when using the
child restraint as a booster. Raise head support
(p.30) and store harness straps and harness
buckle inside the seat (p.40).
2
- Place child restraint forward facing in a
compatible vehicle seat that has both a lap
belt and a shoulder belt (p.12). The bottom of
the restraint should be parallel to the vehicle
seat bottom and the top of the restraint should
contact the vehicle seat back.
3
- Select desired booster recline position 1–4
(PURPLE) (p.30).
Adjust or remove the vehicle headrest as needed
to remove interference. If you remove your
vehicle headrest, be sure to store it in a secure
place; check your vehicle owner's manual.
4
- Open seat cover.
Complete installation with the lower anchor belt
(p.62) or, if necessary, without (p.64).
Move leg rest to desired installation position (p.32).
58 EXEC instructions
™
120
(54 kg)
1
2
3
1
2
4 3
1 2 3 4
4
EXEC instructions
™
59