Forward Facing Installation - Nuna Exec User Manual

Forward Facing Installation

recommended when rear-facing is outgrown,
2 years or older (25–65 lb)
Forward Facing
with vehicle belt & tether
with lower anchor belt & tether
25
(11.3 kg)
Forward Facing Setup
Remove tether from storage and lengthen for use
(p.38).
1
- Select desired forward facing recline position
1–4 (RED) (p.30).
2
- Place child restraint forward facing in a
compatible vehicle seat (p.12) with the bottom
of the restraint parallel to the vehicle seat
bottom and the top of the restraint contacting
the vehicle seat back.
Loosen and unbuckle harness and retain with
magnetic buckle tongue holders (p.22).
3
- Fully raise head support, lift seat cover, and
open forward facing True Tension
Complete installation using your vehicle's lap/
shoulder belt (p.52), the lower anchor belt (p.54),
or a compatible vehicle lap belt (p.56).
Move leg rest to desired installation position (p.32).
WARNING: DO NOT install with both the
vehicle seat belt and lower anchor belt.
50 EXEC instructions
™
40 65
(18.1 kg) (29.4 kg)
door (p.34).
™
1
1
2
4 3
1 4
2 3
2
3
EXEC instructions
™ 51