AbsoluteCOLOR ® • AbsoluteBLACK ® • UniDrums • UniRollers • UniParts • UniCoatings SAMSUNG CLP 500 - CARTRIDGE REMANUFACTURING INSTRUCTIONS INCLUDING CARTRIDGE RESET SYSTEM FUSE INSTRUCTIONS SAMSUNG CLP 500 COLOR LASER PRINTER TONER CARTRIDGE CARTRIDGE RESET SYSTEM INSTRUCTIONS PAGE 2...
Page 2
UNINET IMAGING INC. • SAMSUNG CLP 500 REMANUFACTURING INSTRUCTIONS TABS 1. Remove the outer shell by first removing FIVE screws: FOUR 2. The FIFTH screw is located on the gear-side of the cartridge. screws are located on the top of the cartridge as shown.
Page 3
UNINET IMAGING INC. • SAMSUNG CLP 500 REMANUFACTURING INSTRUCTIONS 5. Slide the developer roller gear off as shown. 6. Remove the locking metal clip and gear from the opposite end of the axle in the same manner as in Step 4 and 5.
Page 4
UNINET IMAGING INC. • SAMSUNG CLP 500 REMANUFACTURING INSTRUCTIONS 9. Remove the toner fill plug to begin the cleaning process. Use 10. After thoroughly cleaning the cartridge and installing clean a vacuum on easy areas making sure there is nothing that will components, you are now ready to install your after-market toner.
Page 5
UNINET IMAGING INC. • SAMSUNG CLP 500 REMANUFACTURING INSTRUCTIONS Remove 12. Locate the FUSE that is soldered to the two outer contact 13. Use pliers to hold the FUSE while applying the heated solder tabs. iron to the tab connected to it as shown. Carefully remove the wire as the solder melts.
Page 6
UNINET IMAGING INC. • SAMSUNG CLP 500 REMANUFACTURING INSTRUCTIONS 16. Insert the completed assembly back into the cartridge by lin- 17. With the tabs in place, the assembly is now locked. ing up the tabs with the holes shown. NOTES: TESTING THE CARTRIDGE 18.