Table of Contents
Advertisement
1.
Ensure the sensor reading screen is shown per below.
2.
Press the
3.
The display will show "
option.
4.
Press the
5.
Press the
6.
The current unit will be shown by default along with a down arrow: e.g. 1.0000 mbar in
screen below.
Note:
•
The down arrow on the bottom right corner of the display means it is a custom unit.
•
The unit will be flashing which means it is the current unit.
•
The Default scaling factor for whichever units the device is currently set to is 1.0000
,
and
keys simultaneously.
" (Advanced) which indicates that the unit is now in the Settings
key 8 times to navigate to the "
key to enter the custom unit's option.
" (Scale) screen as shown below.
Copyright 2019 Baker Hughes, a GE company, LLC ("BHGE") — All rights reserved.
137M7122 DPI 705E / DPI 705E IS User Manual–English | 33
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the DPI 705E and is the answer not in the manual?
Questions and answers
My Druck gauge went into alarm and I can’t stop it now. I’ve tried to switch alarm perimeters off but still it flashes with alarm icon showing. I’ve switched it off and on and still in alarm
To stop the alarm on your Druck DPI 705E gauge:
1. Ensure the sensor reading screen is displayed.
2. Press the designated keys simultaneously.
3. The current alarm state will be shown as “ ” (On) or “ ” (Off).
4. Ensure the alarm is set to OFF to stop it.
This answer is automatically generated