Mounting And Connection - Sophos APX 120 Quick Start Manual

2. Mounting and Connection

For instructions on how to mount your access point, please see the Operating Instructions under
www.sophos.com/get-started-ap
Connect the LAN (PoE) port of the access point to a PoE switch or PoE injector using an RJ45 Ethernet cable.
Alternatively you can connect the LAN port to an Ethernet switch or Hub and power your access point by an
APX120 Power Supply (available as an accessory from your Sophos partner) as shown below.
Sophos Firewall
or Router
Sophos Firewall
or Router
r
Sophos Firewall
or Router
3
Power Supply
Ethernet Switch or Hub
PoE Switch
Switch PoE
Injector
Quick Start Guide
Access Point
Access Point
Access Point
APX 120