English (Original Instructions) - DeWalt DE7260 Original Instructions Manual

EnGLIsh
ROLLING MITRE SAW STAND
DE7260
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.
Technical Data
Maximum working load
Width (Extended)
Width (Folded)
Height (Extended)
Height (Folded)
Weight
EC-Declaration of Conformity
Machinery Directive
Rolling Mitre Saw Stand
DE7260
D WALT declares that these products described under
e
Technical Data are in compliance with:
2006/42/EC, EN ISO 12100: 2010.
For more information, please contact D
address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
Markus Rompel
Director Engineering
D WALT, Richard-Klinger-Straße 11,
e
D-65510, Idstein, Germany
22.12.2017
WARNING: To reduce the risk of injury, read the
instruction manual.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.

DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.
16

WALT one of the

e
DE7260
kg 136

mm 2469
mm 1488

mm 813
mm 419
General Safety Warnings
kg 27.7

Safety Rules

WALT at the following
e

WALT.
e


•
•
•
•
WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
property damage.
Denotes risk of electric shock.
Denotes risk of fire.
WARNING: Read all safety warnings and all
instructions of the rolling mitre saw stand and the
mounted mitre saw. Failure to follow the warnings
and instructions may result in electric shock, fire and/or
serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE
WARNING: For your own safety, read the tool instruction
manual before using any accessory. Failure to heed
these warnings may result in personal injury and serious
damage to the tool and the accessory. When servicing this
tool, use only identical replacement parts.
WARNING: Failure to follow these rules may result in
serious personal injury.
WARNING: To reduce the risk of injury, keep both
hands on handle when raising and lowering the
stand. The stand has gas assist lifting and may raise
unexpectedly when lever is released.
WARNING: Do not open or repair anything at
the gas pressure spring. High pressure inside; risk of
personal injury.
Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
Always have the rolling mitre saw stand serviced by a
qualified repair person using only identical replacement
parts. This will ensure that the safety is maintained.
This product was designed to be used as a stand for
mitre saws. The stand will support up to 136 kg. Any misuse
or abuse can result in product damage or personal injury.
Do not stand on the work table. It is unsafe to climb, sit or
stand on the stand. Do not use the support extensions as a
ladder or scaffolding.