DeWalt Flexvolt DCB500 Original Instructions Manual page 26

EnGLIsh
Cleaning
Cleaning the D

WARNING: Never use solvents or other harsh chemicals for cleaning the non-metallic
parts of the corded power supply. These chemicals may weaken the materials used in
these parts. Use a cloth dampened only with water and mild soap. Never let any liquid
get inside the corded power supply; never immerse any part of the tool into a liquid.
Cleaning the Corded Power Supply Receptacle of the Tool

WARNING: Blow dirt and dust out of the main housing with dry air as often as dirt
is seen collecting in and around the air vents. Wear approved eye protection and
approved dust mask when performing this procedure.
Optional Accessories

WARNING: Since accessories, other than those offered by D
tested with this product, use of such accessories with this tool could be hazardous. To
reduce the risk of injury, only D
this product.
Consult your dealer for further information on the appropriate accessories.
Protecting the Environment
Separate collection. Products and batteries marked with this symbol must not be
disposed of with normal household waste.
Products and batteries contain materials that can be recovered or recycled
reducing the demand for raw materials. Please recycle electrical products and
batteries according to local provisions. Further information is available at www.2helpU.com.
24
WALT Corded Power Supply
e
WALT recommended accessories should be used with
e
WALT, have not been
e