DeWalt Flexvolt DCB500 Original Instructions Manual page 21

Corded power supply
Hide thumbs Also See for Flexvolt DCB500:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 20
Safety Rules for the Corded Power Supply

DANGER: High voltage present inside the unit. Do not probe with conductive
objects. Danger of electric shock or electrocution.

DANGER: If the corded power supply case is cracked or damaged, do not plug
into AC outlet or insert into tool. Return the unit to an authorized D
center. Danger of electric shock or electrocution.

DANGER: The corded power supply and power tool may produce a small
magnetic field. Users with cardiac pacemakers should keep the corded power
supply and power tool at least 15 cm away from implanted device. Users
should immediately stop using this product, remove power, and call physician
if any physical effects are felt.

WARNING: We recommend the use of a residual current device with a residual current
rating of 30mA or less.

WARNING: Review and follow all instructions and warnings contained within
the tool's instruction manual connected with the corded power supply
manual. Failure to follow the warnings and instructions may result in electric shock,
fire and/or serious injury.
Do not use under wet conditions or in presence of flammable liquids or gases.
Do not expose corded power supply to rain or snow.
Use of an attachment not recommended or sold by D
electric shock, or injury to persons.
This corded power supply is not intended for any uses other than powering D
FLEXVOLT™ tools. Any other uses may result in risk of fire, electric shock or electrocution.
Pull by the plug rather than the cord when disconnecting the corded power
supply. This will reduce the risk of damage to the electric plug and cord.
Make sure that the cord is located so that it will not be stepped on, tripped over or
otherwise subjected to damage or stress.
Do not use an extension cord unless it is absolutely necessary. Use of improper
extension cord could result in risk of fire, electric shock or electrocution.
When operating the corded power supply outdoors, always provide a dry location
and use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor
use reduces the risk of electric shock.
Do not force the corded power supply. Use the correct power tool for your application.
Avoid body contact with earthed or grounded surfaces, such as pipes, radiators,
ranges and refrigerators. There is an increased risk of electric shock if your body is
earthed or grounded.
WALT service
e
WALT may result in a risk of fire,
e
EnGLIsh
WALT 2x 54V
e
19

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents