DeWalt Flexvolt DCB500 Original Instructions Manual page 23

Follow the fitting instructions supplied with good quality plugs. Recommended fuse: 13 A.
Using an Extension Cable
An extension cord should not be used unless absolutely necessary. Use an approved
extension cable suitable for the power input of your charger (see Technical Data). The
minimum conductor size is 1.5 mm
When using a cable reel, always unwind the cable completely.
Package Contents
The package contains:
1 Corded power supply
1 Instruction manual
• Check for damage to the tool, parts or accessories which may have occurred
during transport.
• Take the time to thoroughly read and understand this manual prior to operation.
Markings on Corded Power Supply
The following pictograms are shown on the tool:
Read instruction manual before use.
Date Code Position (Fig. A)
The date code , which also includes the year of manufacture, is printed into the housing.
8
Example:
Description (Fig. A–D)

WARNING: Never modify the power tool or any part of it. Damage or personal injury
could result.
AC connector
1
Release button
2
Cord clip
3
Dust cover (Fig. B)
4
2 ; the maximum length is 30 m.
SAVE THESE INSTRUCTIONS
2016 XX XX
Year of Manufacture
Tool's corded power supply AC
5
connector receptacle (Fig. B)
Dust cover holder (Fig. C)
6
Tool's cord clip holder (Fig. D)
7
EnGLIsh
21