English (Original Instructions) - DeWalt D25303DH Original Instructions Manual

DUST EXTRACTION SYSTEM
D25303DH
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.
Technical Data
Contact pressure
Max. drilling depth
Max. drilling diameter
Voltage
NOTE: Max. drilling depth is only 94 mm when system is used on a rotary
hammer without a quick change chuck.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.

DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.

WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury.

CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
property damage.

Denotes risk of electric shock.

Denotes risk of fire.
Safety Instructions

WARNING! Always observe safety regulations applicable
in your country to reduce the risk of fire, electric shock and
personal injury.
Read all of this manual carefully before operating the attachment.
Also refer to the manual of any power tool that will be used with
this attachment.
SAVE THIS MANUAL FOR FUTURE REFERENCE
General Safety Rules
1 . Keep work area clear.
Cluttered areas and benches invite injuries.
2 . Keep children away.
Do not let children come into contact with the tool or
extension cord. Supervision is required for those under 16
years of age.
WALT one of the
e
D25303DH
N 60
mm 105
mm 16
V 18
DC
3 . Use appropriate tool.
The intended use is described in this instruction manual.
Do not force small tools or attachments to do the job of
a heavy-duty tool. The tool will do the job better and safer at
the rate for which it was intended.

WARNING: The use of any accessory or attachment or
performance of any operation with this tool, other than
those recommended in this instruction manual may
present a risk of personal injury.
EC-Declaration of Conformity
Machinery Directive
Dust Extraction System
D25303DH
D WALT declares that these products described under
e
Technical Data are in compliance with:
2006/42/EC, EN60745-1:2009 + A11:2010.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact D
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
Markus Rompel
Vice President of Engineering, PTE-Europe
D WALT, Richard-Klinger-Strasse 11,
e
D-65510, Idstein, Germany
04.02.2019

WARNING: To reduce the risk of injury, read the
instruction manual.
Additional Specific Safety Rules for Dust
Extraction Systems
• Do not use the attachment for drilling applications in wood,
steel or plastic.
• Do not use the attachment in core drilling applications.
• Do not use the attachment for chiselling applications.
• Use only power tools recommended by D
attachment. For more information about D
compatible with this attachment, please contact your local
dealer, refer to the addresses at the back of the manual or visit
www.dewalt.com.
• Do not use the tool in damp or wet conditions.
• Do not allow to be used as a toy. Close attention is necessary
when used by or near children.
EngLIsh
WALT at
e
WALT.
e
WALT with this
e
WALT power tools
e
13