Table of Contents
Advertisement
Option 2 to do manual input of LPAR manager Version Upgrade License Key:
Referring to the LPAR manager Version Upgrade License Key in any form
readable, enter the license key excluding spaces.
Enter Verup License Key : XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
6.
When ready, type "Y" at the "Confirm? (Y/[N])" prompt and press [Enter]. (Entering
"N" revert the screen display to step 3.)
Confirm? (Y/[N]) : Y
7.
The LP firmware update progress is displayed by percentage. Wait until the update is
complete. The update takes three to five minutes.
0% ----- 20% ----- 40% ----- 60% ----- 80% ----- 100%
|........................
8.
A message appears when the update is complete. Press [Enter].
[0000] LP Firmware Updating is successfully finished.
*** HIT ENTER KEY ***
If any error message below is displayed, contact your sales representative.
Completion Code
0001
0002
FFFF
Static Version Upgrade/Revision Update by LP Maintenance Tool
Hitachi Compute Blade Logical partitioning manager Version Upgrade / Revision Update Guide
Recommended Action
Applicable to both version upgrade and revision update: LP firmware
authentication is failed. Contact your sales representative.
Applicable to version upgrade only: LPAR manager version Upgrade
License Key authentication is failed. Contact your sales representative.
Applicable to version upgrade only: The LPAR manager Version Upgrade
License Key may be wrong. Contact your sales representative.
LP firmware updating is failed. Contact your sales representative.
Enter the License Key
Enter "Y"
|
4-7
Advertisement
Table of Contents
