Hitachi Compute Blade Series Update Manual page 38

Checking connection
HVM Navigator partly uses the function of HVM Web System in the background during
execution of firmware update. To establish the network connection between HVM Navigator
and HVM Web System for this purpose, you are prompted to check connectivity and login from
HVM Navigator to HVM Web System using the password defined to HVM Web System. Follow
the steps below to perform this checking.
1. On "Step 6: Check Connection" page, click Password field and type the password defined
to HVM Web System ("password" by default). If the default password is changed from
default, type the new password after the change. When done, click Next button.
The password to HVM Web System once successfully logged in by HVM Navigator is remembered
by HVM Navigator and input of the same password is not required at next firmware update under
HVM Navigator. If such password is changed under HVM Web System, however, the new
password needs to be entered from HVM Navigator.
2-24 Dynamic Version Upgrade / Revision Update by HVM Navigator
Hitachi Compute Blade Logical partitioning manager Version Upgrade / Revision Update Guide