Hitachi Compute Blade Series Update Manual page 32

Selecting destination version-revision of HVM firmware
Select the destination version-revision of HVM firmware according to the steps below.
1. On "Step 2: Select Updated Version" page, check the check box of the target model
(Hitachi Compute Blade 2000 in this example).
2. Select the destination firmware version-revision from the list (59-11 in this example). If
the new HVM firmware for the destination version-revision is not saved in the default
location under the install folder of HVM Navigator \VirNavi\FWUpdateFiles\HVM\CB2000,
click Select button, select the new HVM firmware in the saved location, and retry
selecting the destination firmware version-revision from the list. When done, click Next
button to proceed to the next step.
2-18 Dynamic Version Upgrade / Revision Update by HVM Navigator
Hitachi Compute Blade Logical partitioning manager Version Upgrade / Revision Update Guide