Led Status Indicators For The Studio X50 And Studio X30 Systems - Poly Studio X50 Administrator's Manual

LED Status Indicators for the Studio X50 and Studio X30 Systems

The system provides an LED light bar above the camera to help you understand the system's behaviors.
Basic Studio X50 and Studio X30 LED Indicators and Status
Indicator
Chasing white
Blinking blue
Solid blue for 3 seconds
Blinking green
Solid green
Solid green or white
Pulsing red
Pulsing green
Solid white for 3 seconds
Solid red
Pulsing amber
Blinking red
Blinking amber
Blinking red
Position
All while alternating
Twelve in the middle
All
All
Two in the middle
Four to eight (when in the middle),
indicating the tracked speaker or
the direction of the camera
Twelve in the middle
Twelve in the middle
Twelve in the middle
All
All
All
Twelve alternating
Twelve alternating
Setting Up the System
Status
Boot initialization in progress
Bluetooth in discovery
Bluetooth paired
Incoming call
Outgoing call
Working
The lights are green with supported
applications, with the following
cases:
▪ Tracking people in the group
framing and speaker tracking
mode.
▪ Indicating the direction of the
camera that you customize in
the pan-tilt-zoom (PTZ) mode.
Call on hold
Call on hold (by far site)
Saving a preset
Muted microphone
Firmware update in progress
Error preventing normal operation
In a POST sequence, at least one
test resulted in a warning error. The
system continues to blink amber,
but initializes after the sequence is
complete if no severe errors occur.
In a POST sequence, at least one
test resulted in a severe error. The
system continues to blink red and
doesn't start up.
14