MELICONI Algo 2.1 Manual

Thank you for choosing a Meliconi remote control.
The Algo 2.1 remote control is designed to command 2 different devices of the following types: TV - SAT (satellite decoder) -
TER (digital terrestrial decoder) - DVD (Dvd and Blu Ray) - PVR (Personal Video Recorder and Media Center) - CAB (cable
TV) - ADSL (ADSL decoder) - AUX (other audio video equipments).
By LEARN function, you can capture and store infrared signals from other remotes and match at will to one or more buttons.
It is also designed to be connected to the PC / TABLET / SMARTPHONE via MELICONI audiocable (NOT included in the
package) in order to download the latest information to its activation.
The remote control has a permanent memory, so it does not lose its settings even if there are no batteries in it.
The remote control and batteries should not be exposed to excessive heat such as sunlight, fire
or the like.
The product is not a toy. Keep out of reach of children or domestic animals.
The remote control requires 2 new 1.5V AAA/LR03 alkaline batteries, not included in the
package. Insert with the correct polarity as shown in figure.
DO NOT use rechargeable batteries.
BATTERIES TEST: Press and hold the
continuously until the button is released. If the light is off or blinks, the inserted batteries are low,
therefore they need replacement.
Do not leave exhausted batteries inserted, as liquid may leak and damage the remote control
As the remote control is capable of controlling 2 devices, during setup (and also during normal use), you must select the
operation mode; then define which device you want to control. (TV / STB)
To select the operation mode, press for a moment one of the (2) device selection buttons at the top
corresponding to the device you wish to operate (example:
Before using the remote control, for each device you wish to control, it is essential to set a specific code,
it matched. Use the qr-code on the side or connect to the
Keep this booklet for future reference

SAFETY WARNINGS

INSERTING THE BATTERIES

5
button and check that the LED remains on

SELECTION OF OPERATING MODE

WARNING:

ACTIVATION OF REMOTE CONTROL

Algo 2.1
TV
).
www.cme.it page and follow the instructions.