Advertisement
Istr SPEEDY 110+ guscio V4.qxd
GB
This simplified universal remote control contains all the main functions of most
TV remote controls. Insert the batteries and program your remote control before using it.
To select the next programme or to turn
ON your TV.
Light indicator.
Control the volume using
To select the previous programme
or to turn ON your TV.
Mute key.
The remote control requires 2 new AAA/LR03 alkaline batteries. Insert the batteries as shown:
• Batteries must be changed once a year.
• Change the batteries if the light indicator starts to flash during use. The batteries are low.
• When removing batteries, insert the new ones within 5 minutes or you may have to
reprogram your remote control.
• Make a note of the code for your TV on the adhesive label supplied inside the battery
compartment cover. This note will be handy if you have to reprogram your remote
control.
Read these instructions carefully before programming your remote control!
To use the remote control with your appliances, you must first program Speedy 110 as described below.
You can also visit our Internet site www.meliconi.com to have access to interactive instructions for easier
4
12-12-2007
Thank you for choosing Meliconi.
Keep your Instructions Booklet for future reference.
USING THE KEYS AND FUNCTIONS
-
.
FITTING THE BATTERIES
and faster remote control programming
17:09
Pagina 4
SET-UP
ON/OFF to turn OFF your TV and, in
some cases, to turn ON your TV.
Control the volume using
Press them together to turn ON your
TV on programme 1.
To select an external terminal.
+
.
Advertisement
Table of Contents
Related Manuals for MELICONI SPEEDY 110
Summary of Contents for MELICONI SPEEDY 110
- Page 1 Read these instructions carefully before programming your remote control! To use the remote control with your appliances, you must first program Speedy 110 as described below. You can also visit our Internet site www.meliconi.com to have access to interactive instructions for easier...
- Page 2 • if no keys are pressed for 12 seconds • if you press keys other than those indicated • if the code search list is completed. In this case, visit www.meliconi.com or contact the call center. PROGRAMMED CODE NOTING When you have programmed Speedy 110 Meliconi, note down the code on the label in the battery compartment cover.
- Page 3 At the end, three flashes indicate that the code has been saved correctly. If not, try the code entry procedure again from point 1. USING YOUR REMOTE CONTROL Once you have programmed Speedy 110, you can turn ON your TV in three ways: • Press • Press •...
Need help?
Do you have a question about the SPEEDY 110 and is the answer not in the manual?
Questions and answers