Leds: Ds6200/Ds4200 Iscsi Controller Module (1Gb Rj-45 Sfps); Leds: Ds6200/Ds4200 Sas Controller Module (Hd Mini-Sas) - Lenovo ThinkSystem DS Series Hardware Installation And Maintenance Manual

4-When port is down, both LEDs are off.
Figure 38 LEDs: DS6200/DS4200 iSCSI controller module (1Gb RJ-45 SFPs)
LE Description
D
1 Host 12Gb SAS
Link Status/
Link Activity
2 OK
3 Fault
4 OK to Remove
5 Identify
6 Cache Status
7 Network Port Activity Status
8 Network Port Link Speed
9 Expansion Port Status
1-Cables must be qualified HD mini-SAS cable options.
2-Use a qualified SFF-8644 to SFF-8644 cable option when connecting the controller to a 12Gb SAS HBA.
3-Use a qualified SFF-8644 to SFF-8088 cable option when connecting the controller to a 6Gb SAS HBA.
4-When port is down, both LEDs are off.
Figure 39 LEDs: DS6200/DS4200 SAS controller module (HD mini-SAS)
46 System overview
9 8 7
1-3
4
4
6 5
Definition
Green — The port is connected and the link is up.
Amber — Partial link exists (one or more lanes down).
Blinking green or amber — Host link activity is detected.
Green — The controller is operating normally.
Blinking green — System is booting.
Off — The controller module is not OK, or is powered off.
Off — The controller is operating normally.
Amber — A fault has been detected or a service action is required.
Blinking amber — Hardware-controlled power-up or a cache flush or
restore error.
Off — The controller is not prepared for removal.
Blue — The controller module is prepared for removal.
White — The controller module is being identified.
Green — Cache is dirty (contains unwritten data) and operation is
normal. The unwritten information can be log or debug data that
remains in the cache, so a Green cache status LED does not, by itself,
indicate that any user data is at risk or that any action is necessary.
Off — In a working controller, cache is clean (contains no unwritten
data).
This is an occasional condition that occurs while the system is booting.
Blinking green — A CompactFlash flush or cache self-refresh is in
progress, indicating cache activity.
See also "Cache Status LED details" (page
Off — The Ethernet link is not established, or the link is down.
Green — The Ethernet link is up (applies to all negotiated link
speeds).
Off — Link is up at 10/100base-T negotiated speeds.
Amber — Link is up and negotiated at 1000base-T.
Off — The port is empty or the link is down.
Green — The port is connected and the link is up.
1 = HD mini-SAS host ports
4 3 2
50).