Removing A Ddic (1 Of 2) - Lenovo ThinkSystem DS Series Hardware Installation And Maintenance Manual

If the drive number is known, use the information contained in

plan view of a drawer that is dual-indexed with top drawer (left integer) and bottom drawer (right integer) slot
numbering.
If the disk has failed, a fault LED is lit on the front panel of the affected drawer. The illuminated LED will

either be the Drawer LED or the Logical LED.
If the disk has failed, the Drive Fault LED on the DDIC cover is lit amber.

2. Open the relevant drawer per the instructions provided in
3. Locate the DDIC to be replaced using any of the methods listed in
4. On the face of the DDIC, push the latch button in the direction shown in
DDIC from its seated position in the slot.
Figure 95 Removing a DDIC (1 of 2)
Figure 26 (page 33), which provides a single
"Opening a drawer" (page
step 1 above.
Figure 95 (page 135)
133).
to unlock the
Replacing a DDIC 135