Table of Contents
Advertisement
PDU8000 Precision PDC-T
User Manual
Figure 5-51 Downloading Modbus Configurations
----End
5.5.4.8 Upgrading Software
Prerequisites
To upgrade the software, perform the following steps:
Procedure
Step 1 Connect a USB flash drive to the USB Host port. The message A new USB device is found is
displayed.
Step 2 Log in to the Maint. screen as user admin and tap Upgrade Software.
Issue 01 (2017-07-15)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 MDU Commissioning Guide
55
Advertisement
Table of Contents
