Table of Contents
Advertisement
2.1.43 Delivery roller 1/Delivery roller 2 (15 million sheets)
1) Open the transport roller 4/5 unit [1].
2) Remove the connector cover [1].
- Screw [2]
[1]
3) Remove the connector [1] and the three screws [2] in the rear side.
[2]
[1]
F-2-116
[2]
F-2-117
[2]
[1]
F-2-118
4) Remove the three scerws [1], and then remove the delivery roller 1/2 unit
[2].
0024-6853
[2]
CAUTION:
When reinstalling the delivery roller 1/2 unit, position it with the pressure
arms [4] on its reverse side in the holes [5] of the spine unit. If it is difficult
to position the delivery roller 1/2 unit, turn the spine drive pulley [6]
manually to move the spine unit.
[1]
F-2-119
[4]
[5]
F-2-120
Chapter 2
[6]
2-27
Advertisement
Table of Contents
