Chapter 2
7) Opening the transport roller 2/3 unit [1], remove two screws [2].
[1]
8) Turn the spine bending drive pulley [1] by a hand to move the spine bend-
ing unit (right) [2] fully to the right side.
[1]
9) Lift up the spine bending unit (right) [1] in the arrow direction to remove
it.
2-22
[2]
F-2-92
[2]
F-2-93
[1]
F-2-94
CAUTION:
Install the spine bending unit (right) [1] to keep it in parallel with the
transport roller 2/3 unit [2].
10) Remove the 3 screws [1] to detach the rack mount [2].
[2]
11) Remove the arm springs [1] and the shaft spring [2] to detach the trans-
port driven roller 2.
[1]
[2]
[1]
F-2-95
[1]
F-2-96
[2]
F-2-97