Chapter 2
2) Remove the front cover [1] of the stacking assembly.
- 3 screws [2]
3) Pull out the glue supply port [1]. Loosen the three screws [2] and remove
the one screw [3], then remove the upper front cover [4].
[2]
2.1.5 Removing the Rear Cover
1) Remove the rear cover [1].
- 6 screws [2]
[1]
2-4
[1]
[2]
F-2-9
[4]
[3]
[1]
F-2-10
[2]
F-2-11
2.1.6 Removing the Rear Upper Cover
1) Remove the rear upper cover [1].
- 6 screws [2]
[3]
2.1.7 Removing the Left Upper Cover
1) Open the inserter and top cover.
2) Remove the front cover [1] of the stacking assembly.
- 3 screws [2]
0024-6642
[4]
[4]
F-2-12
[1]
[2]
F-2-13
0024-6643
0024-6644