Advanced Features; Disable Wi-Fi Capability; Re-Enable Wi-Fi Capability; Restart The Soundtouch Pedestal - Bose WAVE SOUNDTOUCH PEDESTAL Manual

Disable Wi-Fi
®
1. Press and hold the pedestal's Control button (8 - 10 seconds).
2. When the Wi-Fi indicator turns off, release the Control button.

Re-enable Wi-Fi capability

Power on the system using the remote control.

Restart the SoundTouch pedestal

On the back of the SoundTouch pedestal, press and hold the
Control button for more than 10 seconds and then release it.
After several seconds the pedestal should turn on again and
reconnect with your network.
Note: Restart does not affect your SoundTouch presets or your
saved network credentials.
ADVA N CE D FE ATUR E S
capability

Reset the SoundTouch pedestal

Factory reset clears all source, volume and network settings from the
system and returns it to original factory settings.
Your SoundTouch account and presets still exist but are not
associated with the system unless you use the same account to set
up the system again.
1. Make sure that the SoundTouch pedestal cable is inserted into
the Bose link connector.
2. Disconnect the system from power.
3. Press and hold the Control button on the back of the
SoundTouch pedestal.
4. While pressing and holding the Control button, reconnect power.
5. Hold the Control button for five seconds.
The system restarts.
6. Open the SoundTouch app and add the system to your network
(see page 7).
|
1 1 E N G