Appendix; Service Processor Tool - Fujitsu PRIMERGY PG-RSBOP2 User Manual

Appendix

1 SERVICE PROCESSOR TOOL

The following describes how to browse, save, and erase the logs that are stored on the
Remote Service Board using SERVICE PROCESSOR TOOL included with the Remote
Service Board Utility with this product.
1.1 Starting Up and Quitting the SERVICE
PROCESSOR TOOL
■Startup procedure
[When using the Drivers CD or the ServerWizard CD]
1. Turn the server unit ON, press the EJECT button on the CD-ROM drive during
POST processing (while RAM module check messages, for example, are being
displayed) and insert Drivers CD or ServerWizard CD in the CD-ROM drive.
2. Select "Basic (BIOS Environment Support Tools)" from the menu that is displayed,
and press the [Enter] key.
MS-DOS is started up.
3. Insert Remote Service Board Utility provided with this product into the floppy disk
drive on the server unit.
4. Enter the following command:
The SERVICE PROCESSOR TOOL is started up.
b: sptool [Enter]
\
16