Philips HP4643/20 User Manual page 8

EnglisH
8
- The maximum temperature occurs just after heating up. The actual
temperature during use may be lower.
Electromagnetic fields (EMF)
This Philips appliance complies with all standards regarding
electromagnetic fields (EMF). If handled properly and according to the
instructions in this user manual, the appliance is safe to use based on
scientific evidence available today.
using the appliance
Straighteners are powerful styling tools and must always be used with
care. As with all straighteners that reach salon-high temperatures, do not
use the appliance frequently to avoid damage to the hair.
Note: If you use the straightener incorrectly or if you use it at the wrong
temperature setting, you could overheat your hair or even burn it. Always
follow the following steps:
1 Insert the plug into the wall socket
 The power-on light goes on (Fig. ).
 Let the appliance heat up for - minutes.
Never leave the appliance unattended when it is plugged in. Never put
the appliance on a surface that is not heat-resistant when it is heating
up and when it is hot.
 Comb or brush your hair so that it is disentangled and smooth.
Use a comb to divide the hair into sections. Do not put too much hair in
one section.
Tip: It is better to section off the crown area and to straighten the hair
underneath first, followed by the top area.
5 Take a section that is not wider than 5cm. Place it between the
straightening plates and press the handles of the appliance firmly
together.