Consultation Hold - Toshiba IP4100 Product Bulletin

Park
1. A call must be established prior to performing the steps below.
2. Press the transfer soft key, dial #33# and press Talk (parks the call locally on this extension).
3. The IP4100-DECT parking the call will disconnect and the parked IP4100-DECT remains connected.
4. To retrieve the parked call from the IP4100-DECT, dial #32# and press Talk (audio path established).
Note If the IP4100-DECT remains parked for 2 minutes, the IP4100-DECT that parked the call will ring. If
one rejects the call, it will disconnect the parked call. One must answer the call and perform the park
sequence again.
Page All (Outbound)
1. Dial #30
2. Press Talk
Note IP4100-DECT cannot be part of Page All Group, only DKTs.
Page Group (Outbound)
1. Dial #31 page group number
2. Press Talk
Note IP4100-DECT cannot be part of Page Group, only DKTs.

Consultation Hold

1. A call must be established before performing the steps below.
2. Press Hold soft key.
3. Dial extension or telephone number.
4. Press Talk (second call initiates and connects audio when answered).
5. Press End to terminate second call.
6. Press Retrieve to resume first call.
7. Press End to terminate first call.
Note Multiple inbound calls are not supported.
Trademarks
Toshiba, IPedge, and Strata are trademarks of Toshiba Corporation.
CIX is a trademark of Toshiba of Canada Limited
All product, service and company names are trademarks, registered trademarks or service marks of their
respective owners.
Introducing the New IP4100 DECT Telephone!
-End-
Quick Reference Guide
19 of 19