Preparation For Software - NEC Express5800 Series Installation Manual

Chapter 1 Installing Operating System

2.1.3 Preparation for software

Prepare the following items before starting setup with OS standard installer.
(1) Requirements for Setup
•
To be obtained from Red Hat, Inc.
– ISO image file of Red Hat Enterprise Linux 6.5 Install DVD
– Update packages
kernel-2.6.32-431.17.1.el6.x86_64.rpm
kernel-devel-2.6.32-431.17.1.el6.x86_64.rpm
kernel-doc-2.6.32-431.17.1.el6.noarch.rpm
kernel-firmware-2.6.32-431.17.1.el6.noarch.rpm
openssl-1.0.1e-16.el6_5.14.x86_64.rpm
openssl-devel-1.0.1e-16.el6_5.14.x86_64.rpm
•
Accessories of the server
– Express5800/R320c-E4, R320c-M4 Installation Guide (Linux) (This manual)
– ft Server Control Software 9.0.5 for Red Hat Enterprise Linux 6.5 Install CD
•
Prepare the following as needed:
– Environment that allows writing to DVD (for creating install media)
– A blank DVD (for creating install media)
(2)
Registration to Red Hat Network
To use Red Hat Enterprise Linux, you must have RHN-ID (registration number for Red Hat Network). If you do
not have RHN-ID or it has expired, the software channel corresponding to subscription is not displayed.
20
Tips
Download the ISO image file of Red Hat Enterprise Linux 6.5 (x86_64) from Red Hat
Network (https://rhn.redhat.com/), and create an install media.
Important A serious vulnerability (e.g., leakage of information on secret key) is found on
OpenSSL package that is bundled in RHEL6.5. Update the package to
openssl-1.0.1e-16.el6_5.14 or later.
Note Download the package from Red Hat Network (https://rhn.redhat.com/).
If registration number (RHN-ID) is not registered, register it according to Chapter 1 (2.1.3
(2) Registration to Red Hat Network).
When downloading the update package, write down the MD5 checksum described in Red
Hat Network.
Express5800/R320c-E4, R320c-M4 Installation Guide (Linux)
2. Setting up Red Hat Enterprise Linux 6 Server