5_First Steps; Battery; 1_Charging The Battery - DeWalt MD501 Quick Start Manual

Hide thumbs Also See for MD501:

Table of Contents

Available languages

5_FIRST STEPS

The battery in this phone

The battery is not fully charged when the phone is purchased,

but it contains enough energy to power on the phone. To obtain

best battery performance and battery life, let the battery

discharge completely before charging it completely for the

ﬁ rst three charging cycles.

NOTE

Because this phone has built-in battery, if the phone has

a fault and cannot be turned off, you can long press the on/off

button for 20 seconds to reset. This will restart the phone.

Using the reset functionality may result in loss of unsaved data,

please use with caution!

Connect the USB cable with the USB connector at the top

of the device.

Connect the other side of the USB cable with the socket

of the Power Supply.

After charging, remove the USB cable from the charger.

This device supports wireless chargers adhering to the

QI standard. The inductive charging area is at the back side

of the housing under the D

cannot be removed by the

WALT logo.

QUICK START

user.

Table of Contents

Table of Contents