Table of Contents
Advertisement
Restoring Configuration File (USB flash drive, CLI)
1.
Insert the USB flash drive that contains the configuration file into USB port of the main unit.
2.
Login to CLI with the account of administrator privileges via serial port or Ethernet port.
3.
Execute "enable" command.
4.
Execute "config terminal" command.
5.
Execute "configuration fetch scp://admin:admin@WWWWWW/var/mnt/usb1/ZZZ" command.
Enter the host name assigned to the relevant device in "WWWWWW" field.
Enter the name of configuration file to be saved in "ZZZ" field.
6.
Execute "configuration switch-to ZZZ" command.
If a file of the same name already exists in the product, execution of
Tips
"configuration fetch" command or "Upload Configuration" will fail. In this case,
rename the configuration file to be restored, and execute again.
- 59 -
Advertisement
Table of Contents
