Usb Playability Information; Supported Mp3 Disc Formats; Troubleshooting - Philips MCM7000/12 User Manual

USB playability information

Supported USB storage devices:
• USB flash memory (USB 2.0)
Supported formats
• MP3 (bit rates 32-320 kbps)
• WMA (bit rates 32-320 kbps)
• MP3 ID3 tag (Ver 2.0)
• WMA ID3 tag
Unsupported formats:
• Empty albums: an empty album is an
album that does not contain MP3/
WMA files, and is not shown in the
display.
• Unsupported file formats are
skipped. For example, Word
documents (.doc) or MP3 files with
extension .dlf are ignored and not
played.
• Video and photo files.
• AAC, WAV, PCM audio files
• DRM protected WMA files (.wav,
.m4a, .m4p, .mp4, .aac)
• WMA files in Lossless format

Supported MP3 disc formats

• ISO9660, Joliet
• Maximum title number: 512 (depending
on file name length)
• Maximum album number: 255
• Supported sampling frequencies: 32 kHz,
44.1kHz, 48 kHz
• Supported Bit-rates: 32~320 (kbps),
variable bit rates
18 EN

8 Troubleshooting

Warning
• Never remove the casing of this apparatus.
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using this
apparatus, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips web site (www.
philips.com/welcome). When you contact
Philips, ensure that the apparatus is nearby
and the model number and serial number are
available.
No power
• Ensure that the AC power cord of the
unit is connected properly.
• Ensure that there is power at the AC
outlet.
• As a power-saving feature, the system
switches off automatically 15 minutes
after track play reaches the end and no
control is operated.
No sound or poor sound
• Adjust the volume.
• Disconnect the headphones.
• Check that the speakers are connected
correctly.
• Check if the stripped speaker wires are
clamped.
No response from the unit
• Disconnect and reconnect the AC power
plug, then turn on the unit again.
• As a power-saving feature, the system
switches off automatically 15 minutes
after track play reaches the end and no
control is operated.
Remote control does not work
• Before you press any function button,
first select the correct source with the
remote control instead of the main unit.