Other Features; Set Alarm Timer; Set The Sleep Timer; Listen To External Audio Device - Philips MCM7000/12 User Manual

6 Other features

Set alarm timer

This unit can be used as an alarm clock. You can
select CD, FM or USB as alarm source.
Note
•
Make sure that you have set the clock
correctly.
1
In standby mode, press and hold TIMER
until [TIMER SET] scrolls on the display.
2
Press source buttons on the remote
control to select a source: CD/MP3,
TUNER, USB.
3
Press TIMER to confirm.
»
The hour digits are displayed and begin
to blink.
4
Press VOL +/- repeatedly to set hour,
then press TIMER again to confirm.
»
The minute digits are displayed and
begin to blink.
5
Press VOL +/- to set minute, then press
TIMER to confirm.
» VOL (volume) is displayed and begins
to blink.
6
Press VOL +/- to adjust volume, then
press TIMER to confirm.
Activate/deactivate alarm timer
1
In standby mode, press TIMER repeatedly
to activate or deactivate timer.
»
If timer is activated,
Tip
• Alarm timer is not available in MP3 LINK
mode.
•
If CD/USB source is selected, yet no disc is
placed or no USB connected, the system
switches to the tuner source automatically.
16 EN
is displayed.

Set the sleep timer

This unit can switch to standby automatically
after a set period of time.
1
When the unit is turned on, press SLEEP
repeatedly to select a set period of time
(in minutes).
»
When sleep timer is activated, the
display shows
To deactivate sleep timer
1
Press SLEEP repeatedly until "SLEEP
OFF" is displayed.
»
When sleep timer is deactivated,
disappears on the display.
Listen to external audio
device
You can listen to an external audio device such
as MP3 player through this unit.
1
Connect the audio device.
• For audio device with red/white
audio output sockets:
Connect a red/white audio cable
(not supplied) to the AUX IN
sockets and to the audio output
sockets on the audio device.
• For audio device with headphone
sockets:
Connect the supplied MP3 Link cable
to the MP3 LINK socket and to the
headphone socket on the audio
device.
2
Select MP3 LINK/AUX source.
3
Play the device.

Listen through headphone

1
Plug a headphone into the
the unit.
.
socket on