Connect Fm Antenna; Connect Power; Prepare The Remote Control - Philips MCM7000/12 User Manual

For the speaker side:
1
Unscrew the speaker connectors.
2
For the left speaker, identify the speaker
cable that is connected to the left
connectors on the main unit.
3
Insert fully the red end of the speaker
cable into the red (+) connector.
4
Screw the red (+) connector to secure
the cable.
5
Insert fully the silver end of the speaker
cable into the black (-) connector.
6
Screw the black (-) connector to secure
the cable.
7
Repeat steps 2-6 for the right speaker.

Connect FM antenna

Tip
•
For optimal reception, fully extend and adjust
the position of the antenna.
•
For better FM stereo reception, connect an
outdoor FM antenna to the FM ANTENNA
socket.
•
The unit does not support MW radio
reception.
1
Connect the supplied FM antenna to the
FM ANTENNA socket on the main unit.
L L
FM
R R
LINE OUT AUX IN DEMO ANTENNA
FM

Connect power

Caution
• Risk of product damage! Ensure that the
power supply voltage corresponds to the
voltage printed on the back or the underside
of the unit.
• Risk of electric shock! When you unplug the
AC power cord, always pull the plug from the
socket. Never pull the power cord.
•
Before you connect the AC power cord,
ensure that you have completed all other
connections.
1
Connect the power cord to:
• the AC~ socket on the main unit.
• the power outlet.

Prepare the remote control

Caution
•
Risk of explosion! Keep batteries away from
heat, sunshine, or fire. Never discard batteries
in fire.
To insert the remote control battery:
1
Open the battery compartment.
2
Insert 2 AAA batteries with correct
polarity (+/-) as indicated.
3
Close the battery compartment.
L L
FM
R R
LINE OUT AUX IN DEMO ANTENNA
EN 11