6 What to do if ...
In this chapter you are told how the Server Unit informs you of how you perform a system
dump when inexplicable system downtime occurs.
In the event of hardware faults the operating system will take the necessary recovery action
autonomously. Customer Service is automatically informed by means of a ServiceCall and
initiates repair measures, possibly in conjunction with the customer.
6.1 Indicators when a hardware fault occurs
The server informs you of hardware faults in the following manner:
On the server's control panel
●
When the yellow CHECK lamp lights up, this can signal a hardware fault. At the same
time the status indicator displays the FLAG code. This can mean a fault in the service
processor or a hardware malfunction.
In the SVP console window
●
On the SVP console, indicators in row 24 of the SVP frame can signal a hardware fault.
Evaluation of the FLAG code is reserved for Customer Support. The figure below shows
the format of the display:
ccccccccccccccccccccccccccccccccccccccccccccccccccccccc
RA
Figure 48: Status display in rows 24 and 25 of the SVP console
FLAG code
responses:
–
U41859-J-Z126-2-76
. . .
can have different meanings and consequently require different
FF
FF
A WRITE-CONSOLE message has been displayed. This can be deleted with
[ModSel]. This does not delete the FLAG code indicator.
FLAG CODE = FFFFFFFF FFFFFFFF
[]-[]00
81