Fujitsu BS2000 SE Series Operating Manual page 26

SVP frames and subframes
CPU SELECT =>
0 ... F
STOP/START MODE => This can be used to indicate whether the functions in the
1
2
The following table shows all the functions that can be meaningfully combined:
Function
CPU STOP
INTERRUPT
STORE STATUS
RESTART
TOD ENABLE
SYSTEM RESET
SYSTEM RESET CLEAR
–: unusable
26
A particular CPU can be selected here for the functions in the
EXECUTION selection menu (see the previous page).
The CPUs available are displayed in the two lines below this.
Selection of a particular CPU
EXECUTION selection menu are to be carried out for all CPUs or
only for the CPU in the CPU SELECT field.
ALL CPU all CPUs are selected
TARGET CPU only the CPU selected in the CPU SELECT field is selected
CPU SELECT STOP/START MODE
- 1 All CPU
0 ... F 2 TARGET CPU
0 ... F 2 TARGET CPU
–
Operating the service processor
Effect on:
all CPUs
selected CPU
selected CPU
– all CPUs
U41859-J-Z126-2-76