Operating the service processor
POWER ON IPL ==> Here you determine the behavior of the SVP after switching on.
1
2
INITIAL FRAME ==> Here you can set the display form of the PROGRAM LOAD FRAME.
1
2
U41859-J-Z126-2-76
ENABLE
DISABLE
LOAD FRAME (BASIC)
LOAD FRAME (DETAIL)
automatically executes IPL after IMPL
does not execute IPL, i.e. IPL must be triggered
manually using PROGRAM LOAD FRAME: BASIC
or PROGRAM LOAD FRAME: DETAIL-1
PROGRAM LOAD FRAME: BASIC (see
PROGRAM LOAD FRAME: DETAIL-1 (see
page
28)
SVP frames and subframes
page
27)
51