Project Settings; Forget Password - Dahua Digital VTH Series User Manual

If SD card isn't inserted into the device, SD format function is invalid.
Press [Setting].
The system pops up "Password" prompt box.
Input login password and press [OK].
Default login password is 123456. Please refer to "6.2.6.3 Password Setting" for
details.
Press [Product Info].
The system displays "Product Info" interface, as shown in Figure 6-18.
 Reboot
Press [Reboot] and press [OK] at prompt interface. The device will reboot.
SD Format

Press [SD Format] and press [OK] at prompt interface. The SD card will be formatted.
6.3

Project Settings

6.3.1 Forget Password

If you forget initialization password when entering project settings interface, reset password
through "Forget Password" at the interface or in VDPconfig tool.
Press [Setting] for over 6 seconds.
The system pops up "Password" prompt box.
Figure 6-18
6.3.1.1 Reset the Password at the Interface
Interface Operation 59