Philips Avent SCF356 User Manual page 13

warmer but stir the baby food while the jar or container is still in
the baby bottle warmer.
Note: You can start stirring the food once the second segment of the progress
indicator lights up continuously. Stirring before this moment is not effective as
the temperature of the food is still too low.
Caution: Do not take the food container or jar out of the baby bottle
warmer during warming.
7 When the entire progress indicator lights up continuously, the baby
food has reached the desired end temperature.
Note: Due to the large variety of baby food consistencies, it is strongly
recommended that you continuously stir the baby food and check its
temperature while it is heating up for an optimal result.
After warming, always taste the baby food to ensure it is not too
,
hot. If the baby food is not warm enough, put the container back
into the baby bottle warmer, keep it longer in the keep-warm mode
and stir the baby food.
When the baby food is warm, you can either take the baby food
,
container or jar out of the baby bottle warmer to feed your baby
right away (see section 'Feeding your baby immediately') or you can
keep it warm in the baby bottle warmer (see section 'Keeping baby
food warm').
Feeding your baby immediately
1 After warming, taste the baby food to ensure it is not too hot.
Press the on/off button to switch off the appliance and take out the
baby food container or jar (Fig. 16).
Keeping baby food warm
1 When the baby food has reached approximately the desired end
temperature, the baby bottle warmer automatically switches to a
keep-warm mode. During this mode, the baby food is kept for
20 minutes on the desired temperature.
ENGLISH
13